HH-SWM01 Spot welding machine 电子电焊机

13800000000
产品参数
我知道了
产品详情


# HH-SWM01

Spot weldingmachine

Description

Argon-arcSpot Welders includes five preset basic programs for gold (Au), cobalt chrome(co-cr), hybrid-welding (such as precious to non precious), titanium (Ti) andorthodontics.Besides its features compact size, safe and stable system, easyoperations, low noise and maintenance. It requires minimum working space, andthe adjustable power and pulse settings allows adjustment of penetration depthand welding spot diameter. This unit will switch to Ortho mode if there is nooperations within 5 minutes to prevent any damage to the workpiece. It is greatfor jewelry and dental welding.

TechnicalData:

PowerSupply: 220V/110V 50/60Hz

PowerConsumption: 100W

Degreeof protection: IP21

Gassupply pressure: ≥0.1Mpa

Weldingvoltage: 40V

Weldingcurrent: 5A600A

Weldingtime: 3ms--30ms

Max.welding frequency: 1Hz

Max.argon consumption: 5L/min

Inorder to avoid electric shock, fire and dangerous accident when usingelectrical equipment, be sure to pay attention to following basic safetymeasures.

1.Before using the instrument, please read this manual and precautions. Placingthis manual near the instrument for convenient view.

2.Please keep the electrical equipment away from children and absolutely forbidchildren to play this electrical equipment, spare parts and other cables.

3.The operating of the equipment should maintain good ventilation and lighting,do not work in a humid and dusty environment thus to avoid accidents byabnormal environment.

4.Never let any liquid enter the instrument.

5.There will be a strong arc light when operating, irrelevant personnel shouldaway from the work site for avoiding damage the eyes.

6.Do not use cable to drag equipment. Cables should be away from heat, oil andother sharp objects, so as not to damage the cable.

7.You must completely cut off the power before clean the equipment and open thecase.

8.This machine with compact and reasonable structure does not need special and tedious maintenance. Paying attention to the cleaning of theinstrument, especially the microscope. Not clean the attachments will seriouslyaffect the observation of objects.

9.Theinstrument should be covered with a dust cover in non-working status.

10.For your security, please use the correct fittings.

Attention:The machine did not include the microscope, and you can also work withoutmicroscope.